Filter
Top Products
38 Plasma Monitor
External Control Device Setup
23. ISM Method
(Command 1 : j, Command 2 : p)
G To control the ISM method. You can also adjust ISM
Method in SPECIAL menu.
Transmission
Data 8 : Normal Mode
4 : White Wash
2 : Orbiter
1 : Inversion
[j][p][ ][Set ID][ ][Data][Cr]
Ack
[p][ ][Set ID][ ][OK][Data][x]
24. Low Power
(Command 1 : j, Command 2 : q)
G To reduce the power consumption of the monitor. You
can also adjust Low Power in SPECIAL menu.
Transmission
Data 0 : Off
1 : On
[j][q][ ][Set ID][ ][Data][ ][Cr]
Ack
[q][ ][Set ID][ ][OK][Data][x]
25. Orbiter Time Setting
(Command 1 : j, Command 2 : r)
G To adjust orbiter operation time term.
Transmission
Data Min: 1 ~ Max: FE
*
Refer to ‘Real data mapping 1’. See page 35.
[j][r][ ][Set ID][ ][Data][ ][Cr]
Ack
[r][ ][Set ID][ ][OK][Data][x]
26. Orbiter Pixel Setting
(Command 1 : j, Command 2 : s)
G To adjust pixel number in orbiter function.
T
ransmission
Data Min: 1 ~ Max: 3
*
Refer to ‘Real data mapping 1’. See page 35.
[j][s][ ][Set ID][ ][Data][Cr]
Ack
[s][ ][Set ID][ ][OK][Data][x]
27. Auto Configure
(Command 1 : j, Command 2 : u)
G To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
T
ransmission
Data 1: To set
[j][u][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK][Data][x]
28. Key
(Command 1 : m, Command 2 : c)
G To send IR remote key code.
Transmission
Data Key code - Refer to page 40.
[m][c][ ][Set ID][ ][Data][Cr]
Ack
[c][ ][Set ID][ ][OK][Data][x]
29. Input select (Command 1 : x, Command 2 : b)
(Main Picture Input)
G To select input source for monitor.
Transmission
Data Structure
MSB LSB
0
[x][b][ ][Set ID][ ][Data][Cr]
Ack
[b][ ][Set ID][ ][OK][Data][x]
0 0 0 0 0 0 0
External Input Data
0 0 1 0 Video
0 1 0 0 Component
0 1 0 1 RGB-DTV
0 1 1 0 RGB-PC
1 0 0 1 HDMI
External Input Input Number
Input Number Data
0 0 0 0 Input1
0 0 0 1 Input2
If you use either RGB-DTV or RGB-PC command, It is possi-
ble to select RGB input.
* If you read status of the input mode in RGB input , Monitor
will always send the DTV mode status.
U514Aen 98/2/18 4:26 AM Page 38
Downloaded From TV-Manual.com Manuals