Filter
Top Products
Getting Started
WorkCentre Pro 665/685/765/785 4-13
Selecting the Scan Contrast
To select the Scan Contrast:
Press the
Contrast
key until the required contrast mode is indicated
by a Contrast LED
The Contrast setting adjusts the print darkness of the copy or
transmitted document. The default contrast setting is normal on base
machine. The machine returns to the default setting after each
transmission.
Refer to the
System Administrator’s Guide for details about changing the
default setting for contrast.
The following table describes the available contrast selections
Note: When a Contrast LED is not illuminated, the Contrast
setting is Normal.
Contrast selection Description
Normal For documents printed with ordinary image density.
Selected when the Contrast LED is off.
Lighten For documents with dark print that need to be
adjusted to print lighter.
Darken For documents with light or faint print that need to be
adjusted to print darker.