Filter
Top Products
14
Turning on the Monitor
- When using the remote control, aim it at its sensor on the Monitor.
Turning on the Monitor just after installation
Turning on the Monitor (power cord is still connected)
1. Connect power cord correctly.
2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the
INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT button on the remote control and
then the Monitor will be switched on.
1. If the Monitor is turned off with the ON/OFF button on the Monitor
• Press the ON/OFF button on the Monitor to turn on the Monitor.
2. If the Monitor is turned off with the remote control and also the ON/OFF button on the Monitor
• Press the ON/OFF button on the Monitor and then press the INPUT SELECT button on the Monitor or press
the POWER, INPUT SELECT button on the remote control to turn on the Monitor.
• Adjusting volume level
Volume(
GG
) button increases the level of sound and volume(
FF
) button decreases the level of sound.
Menu language setup
- The menu can be displayed on the screen in desired language. First select your language.
1. Press the MENU button and then
DD
/
EE
button to select the SPECIAL menu.
2.. Press the
GG
button and then
DD
/
EE
button to select
Language
.
3. Press the
GG
button and then
DD
/
EE
button to select your desired language.
From this point on, the on-screen display will be presented in the language of
your choice.
4. Press the MENU button.