Filter
Top Products
26
13. Remote control lock mode (Command:m)
G To lock the front panel controls on the monitor and remote
control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : Lock off 1 : Lock on
Data 0 : Lock off 1 : Lock on
* If you’re not use the remote control, set this mode.
When main power is on/off, remote control lock is released.
[m][ ][Set ID][ ][OK][Data][x]
14. PIP / Twin (Command:n)
G To control the PIP (Picture In picture).
You can also control the PIP/DW using the PIP or Twin pic-
ture button on the remote control or in the Special menu.
Transmission
Data 0 : PIP/DW off
1 : PIP
2 : DW1
3 : DW2
Data 0 : PIP/DW off
1 : PIP
2 : DW1
3 : DW2
[k][n][ ][Set ID][ ][Data][Cr]
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
G To adjust the screen sharpness.
You can also adjust sharpness in the video menu.
Transmission
11. Sharpness (Command:k)
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping1’ (See p.28).
[k][k][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 64
[k][ ][Set ID][ ][OK][Data][x]
12. OSD select (Command:l)
G To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : OSD off 1 : OSD on
Data 0 : OSD off 1 : OSD on
[l][ ][Set ID][ ][OK][Data][x]
17. Treble (Command:r)
G To adjust treble.
You can also adjust treble in the audio menu.
Transmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping1’ (See p.28).
[k][r][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 64
[r][ ][Set ID][ ][OK][Data][x]
16. PIP position (Command:q)
G To select sub picture position for PIP.
You can also adjust the sub picture position using the
WIN.POSITION on the remote control or in the Special menu.
Transmission
Data 0 : Right down on screen
1 : Left down on screen
2 : Left up on screen
3 : Right up on screen
[k][q][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : Right down on screen
1 : Left down on screen
2 : Left up on screen
3 : Right up on screen
[q][ ][Set ID][ ][OK][Data][x]
15. PIP Size (Command:o)
G To select the PIP picture format.
You can also select the PIP picture format using the
WIN.SIZE on the remote control.
Transmission
[k][o][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : 4:3 1 : 16:9
Data 0 : 4:3 1 : 16:9
[o][ ][Set ID][ ][OK][Data][x]
18. Bass (Command:s)
G To adjust bass.
You can also adjust bass in the audio menu.
Transmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping1’ (See p.28).
[k][s][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 64
[s][ ][Set ID][ ][OK][Data][x]