LG Electronics MT-50PZ40/, MT-50PZ41/, MT-50PZ43/, MZ-50PZ42/, MZ-50PZ43/ Computer Monitor User Manual


 
ENGLISH
27
19. Balance (Command:t)
G To adjust balance.
You can also adjust balance in the audio menu.
Transmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping1’ (See p.28).
[k][t][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 64
[t][ ][Set ID][ ][OK][Data][x]
21. Red Adjustment (Command:v)
G To adjust red in color temperature.
Transmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 2’ (See p.28).
Data Min : 0 ~ Max : 64
[k][v][ ][Set ID][ ][Data][Cr]
Acknowledgement
[v][ ][Set ID][ ][OK][Data][x]
22. Green Adjustment (Command:w)
G To adjust green in color temperature.
Transmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 2’ (See p.28).
Data Min : 0 ~ Max : 64
[k][w][ ][Set ID][ ][Data][Cr]
Acknowledgement
[w][ ][Set ID][ ][OK][Data][x]
23. Blue Adjustment (Command:$)
G To adjust blue in color temperature.
Transmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 2’ (See p.28).
Data Min : 0 ~ Max : 64
[k][$][ ][Set ID][ ][Data][Cr]
Acknowledgement
[$][ ][Set ID][ ][OK][Data][x]
24. PIP input select (Command:y)
G To select input source for sub picture in PIP mode.
Transmission
Data 0 : RGB1 1 : Component (or AV1)
2 :
Video (or AV2)
3 : S-Video
4 : RGB2
[k][y][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : RGB1 1 : Component (or AV1)
2 :
Video (or AV2)
3 : S-Video
4 : RGB2
[y][ ][Set ID][ ][OK][Data][x]
20. Color temperature (Command:u)
G To adjust color temperature.
You can also adjust CSM in the video menu.
Transmission
Data 0: Normal 1: Cool 2: Warm 3: User
Data 0: Normal 1: Cool 2: Warm 3: User
[k][u][ ][Set ID][ ][Data][Cr]
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
25. Orbiter (Command:p)
G To control the orbiter function on/off.
Transmission
Data 0 : Orbiter off
1 : Orbiter on
[j][p][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : Orbiter off
1 : Orbiter on
[p][ ][Set ID][ ][OK][Data][x]
26. White Wash (Command:q)
G To control the white wash function on/off.
Transmission
Data 0 : White Wash off
1 : White Wash on
Data 0 : White Wash off
1 : White Wash on
[j][q][ ][Set ID][ ][Data][Cr]
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]