Filter
Top Products
Unloading and Handling 7
3.0 UNLOADING AND HANDLING
The UPS module is shipped in one cabinet to allow easy handling at the site. Because the weight
distribution in the cabinet is uneven, use extreme care during handling and transport. Your
installation may also include Battery Cabinets and a System Control Cabinet.
To reduce the possibility of shipping damage, cabinets are shored with 2x4 bracing, secured with
screw-type nails. This shoring must be carefully removed prior to unloading.
WARNING
EXERCISE EXTREME CARE WHEN HANDLING UPS CABINETS
TO AVOID EQUIPMENT DAMAGE OR INJURY TO PERSONNEL.
THE UPS MODULE WEIGHS UP TO 12,000 POUNDS. BATTERY
CABINETS WEIGH BETWEEN 3100 AND 4900 POUNDS.
LOCATE CENTER OF GRAVITY SYMBOLS BEFORE HANDLING
CABINET. TEST LIFT AND BALANCE THE CABINET BEFORE
TRANSPORTING. MAINTAIN MINIMUM TILT FROM VERTICAL
AT ALL TIMES.
SLOTS AT THE BASE OF THE MODULES AND BATTERY
CABINETS ARE INTENDED FOR FORKLIFT USE. BASE SLOTS
WILL SUPPORT THE UNIT ONLY IF THE FORKS ARE
COMPLETELY BENEATH THE UNIT.
SYSTEM CONTROL CABINETS (SCC’S) HAVE HOLES
INTENDED FOR RIGGING BARS OR CHAINS. PREVENT
CHAINS OR CABLES FROM CONTACTING CABINET BY USING
SPREADER BAR AND ADEQUATE PADDING.
CAUTION
Extreme care is necessary when removing shoring braces. Do not
strike cabinet with hammers or other tools.
DISCONTINUED
PRODUCT