Filter
Top Products
20
INSTALLATION
This section includes unloading, inspection, mounting and connections for the maintenance bypass
cabinets. Reading this section in its entirety before you begin is a good preparation for your start-up.
UNLOADING
The unit is shipped on a box that is banded down
to a pallet. To unload the maintenance bypass
cabinet:
• Remove the banding from the container
• Open box and remove maintenance bypass.
• Inspect for any damage to the unit. Report
any damage to the shipping carrier and
complete a freight damage claim form.
Insure that the system ordered is what was
received prior to mounting.
Mounting
The Liebert UPStation S™ Maintenance Bypass
Cabinet is designed for wall mount only. Prior to
installation, verify that the wall can support
the weight of the bypass cabinet. Weights
can be found on page 18.
The dimensions required for mounting of the maintenance bypass are illustrated below. All dimensions are
in inches.
Model Number A B C D E F G H
VM12000 12 24 24 22.5 21 1.5 .75 .5
VM18000 16 24 24 22.5 21 1.5 .75 .5
Note: All dimensions are in inches