Filter
Top Products
CoolTherm
Manual / Bedienungsanleitung
CoolTherm 01_998_330_0_k page / Seite 17/83
three- way valve control characteristic (factory setting)
4. Storage and transportation
• Cover open pallets with tarpaulins and protect the components
from soiling (e. g. sand, rain, dust, etc.).
• Keep storage temperatures between –30 °C and +50 °C / -22°F and 104°F.
• The heat exchanger must be completely drained (to prevent the risk of
frost damage)
• When stored for more than 1 year, check the the fan bearings prior to
installation. (⇒ Turn fans by hand.)
• CoolTherm can be transported using a forklift truck or crane. For transport
using a crane, straps must be used. The CoolTherm weighs, depending on
the version, up to 340 kg / 749 lbs. (net weight)
• Avoid twisting the housing or other damage.
• Use suitable tools during installation, e. g. approved scaffolding.
• Prior to lifting the CoolTherm using a crane or forklift truck, close all doors.
• Do not stand under suspended loads.
• Hooks attached to the load must be be of appropriate tensile strength.
• CoolTherm must not be lifted at an angle using a crane.
• All packaging is to be removed prior to commissioning CoolTherm.
Start at 16°C
air inlet
temperature