Filter
Top Products
CoolTherm
Manual / Bedienungsanleitung
CoolTherm 01_998_330_0_k page / Seite 6/83
Temperature spread, water: 6K
Use of anti-freeze in the chilled water: upon request
Water connection: from below
Condensed water connection: from below
Nominal voltage at cooling capacity:
12 KW, 17 KW, 25 KW 200V to 264V /
50Hz / 60 Hz
Max. operating pressure: 10 bar / 145 PSI
3. Description
3.1 General function
CoolTherm complies with the conditions of EN 60950
The modular design facilitates the installation of all 19“ equipment of varying depth.
Heat produced by installed equipment (e. g. servers) is reliably removed using the cold water
system integrated into the server cabinet. The cooling system is inherently safe because water
cannot reach the server area.
The cooling system comprises a high-performance air/water heat exchanger, fans with fan control
unit (fan-speed according to heat load) for the ducted supply of air and cold water connection.
The air circuit is closed such that no heat (thermal load) is emitted to the environment.
Attention! CoolTherm only works if cold server feed air
and heated server outlet air are fully separated.
Height units not in use have to be sealed using blanking panels.
Server
Luftkanal
Lufttrennung
KALT
KALT
WARM
WARM
WARM
WARM
WARM
WARM
WARM
WARM
COLD
Air duct
Air separation
Top view