Filter
Top Products
LINDY Dual/Quad PRO Installation and Use Page 16
possible, 2 metre cables are recommended as these will give very high video
quality. Any unused computer connections can be left unconnected. To connect
computers with serial mouse connections and AT style keyboard connections use
the adapters specified in appendix A. If you have an existing 6-pin mini-DIN to 9-pin
serial adapter that came with a mouse it may not be suitable for use with the LINDY
Dual/Quad PRO as the are several different standard wiring configurations for these
adapters.
The LINDY Dual/Quad PRO is now ready for connection to the mains using the
mains power adapter supplied. It is important to apply power to the LINDY
Dual/Quad PRO first, then power on the monitor and each of the computers in turn.
Failure to switch the LINDY Dual/Quad PRO and computers on in the correct order
can lead to the mouse and/or keyboard not being recognised by the computers
when they are switched on.
You may attach the power adapter to either power inlet A or power inlet B (see
figure 2). These ports are both the same and are provided to enable you to connect
a redundant (spare) power supply (see section 4.2 for more details). Connect your
power adapter to either of the power inlet ports to power on the LINDY Dual/Quad
PRO. There is no ON/OFF switch and the LINDY Dual/Quad PRO will start to
operate as soon as the power is applied.
2.4 Configuring your PCs
Configure your PC in the same way that you would if your keyboard, mouse and
monitor were all connected directly to your PC, but bearing in mind the following
point:
LINDY Dual/Quad PRO emulates Microsoft compatible serial, IntelliMouse and