Filter
Top Products
EN 22
The status page displays the current status of the USB devices attached.
• Device Status:
• Vendor Id
• Product Id
• Class Id
• Peer-ip address
• Status
This status page is updated automatically every 10 seconds and it shows the device connected to USB 2.0
DEVICE SERVER board.
The Device Status table shows the Vendor Id, Product Id, Class, Peer-IP and the Status of the Device
connected. The Peer-IP is the IP Address of the computer on which the device is currently accessed.
Whenever any Device is Busy the Status of that device changes to “BUSY” and whenever it is not being
used it changes to “FREE” as shown below.
3.3.2. The Upgrade Page
The Upgrade page allows you to upgrade the firmware.
Select the file to be upgraded by click on the Browse option on the Upgrade page as shown below.