Filter
Top Products
Working It Manual Mode: What You See Is What You Get
2• 5
Manual Mode: What You See Is What You Get
When none of the A, B, C, D Buttons are lit, Duoverb is operating in Manual Mode,
meaning that all of the controls are active and the sound of the amp is determined by
the current knob settings. Just like pretty much any other amplifier, right?
If you are not in Manual Mode and would like to be, simply give the lit A,B, C, or D
Button a quick press.
Using The Channel Memories
Duoverb can store and recall your favorite settings using the A, B, C, D Buttons.
Save: Any time you’ve dialed up a sound that you’d like to save for later recall, all you
have to do is hold down button A, B, C or D for 3 seconds. At the end of that 3
seconds, the button you held will flash to let you know that you’ve successfully stored
your present setting of all the controls to that button. Now you can carry on tweaking
away to make other sounds, and when you’re ready to go back to that perfect one you
just saved, just tap the button again....
Recall: When you tap one of the A, B, C, D Buttons to light it up, Duoverb recalls
the settings that were stored in that button’s Channel memory. This will affect
basically everything except the Master volume, including choice of Amp Models,
the on/off state of Amp 1 and Amp 2, the Drive, Bass, Mid, Treble, Presence,
Volume settings for both amps and the Blend/Split option.
The various front panel lights will show the recalled settings, but the knobs will not.
Turning any knob or operating any switch will override the recalled setting for that
control only. To override all the recalled settings and get the sound determined by the
current setting of all the knobs, press the lit A,B, C, D Button. You’re now back in
What-You-See-Is-What-You-Get Manual Mode.
See Chapter 4 for details on how to store and recall a total of 36 Duoverb Channel
Memories using your feet.
To reset all the Channel Memories (including all 36 available from an FBV) to their
factory state, hold the A and D Buttons while powering up Duoverb.
Duet Manual Page 5 Tuesday, October 1, 2002 9:36 PM