Filter
Top Products
Appendices • MIDI Continuous Control Messaging (Part 2)
5 • 3
MIDI Continuous Control Messaging (Part 2)
Reverb Models: 0= Deluxe Spring, 1= Twin Spring, 2= King Spring, 3= Small Room 1, 4= Tiled Room 1,
5= Bright Room 1, 6= Dark Hall 1, 7= Medium Hall, 8= Really Large Hall, 9= Rich Chamber 1,
10= Rich Chamber 2, 11= Cavernous Chamber, 12= Slap Plate 1, 13= Plate, 14= Large Plate 1
A.I.R. II Models: 0=A.I.R. II Off, 1=Shure SM 57on axis, 2=Shure SM 57off axis, 3=MD 421 on axis,
4=MD4210 off axis, 5=U-67 on axis, 6= U-67 off axis
* = In addition to transmitting when a switch is stepped on, the state is stored with a Channel Memory and
transmitted when the Channel loads
Amp Parameter MIDI MIDI CC Range Notes
TX RX CC# Min Max
Reverb Enable √ 36 0 127 0~63=Off ; 64~127=On
Reverb Model √ 37 0 15 Range = 0~15, see list below
Reverb Decay √ 38 0 127
Reverb Pre-Delay √ 40 0 127 Non-Spring types
Reverb Tone √ 39 0 127
Split/Blend Mode √ 6 0 3 Range = 0~3. On prev. page
A.I.R. II Model √ 70 0 127 Range = 0~6. See list below.
FX Loop √ 107 0 127 0~63=Off ; 64~127=On
Tuner Enable √ 69 0 127 0~63=Off ; 64~127=On
Wah Enable √√43 0 127 0~63=Off ; 64~127=On
Wah Position √√4 0 127
Vol Pedal Position √√7 0 127
Volume Pedal Minimum
Position
√ 46 0 127
Volume PRE/POST √ 47 0 127 0~63 = Pre-Amp Model;
64~127 = Post-Amp Model
(FBV) Stomp Box 1 √ 25 0 127 0~63=Off ; 64~127=On *
(FBV) Stomp Box 2 √ 109 0 127 0~63=Off ; 64~127=On *
(FBV) Stomp Box 3 √ 110 0 127 0~63=Off ; 64~127=On *
(FBV) Amp 1 √ 111 0 127 0~63=Off ; 64~127=On
(FBV) Amp 2 √ 112 0 127 0~63=Off ; 64~127=On
(FBV) Pitch/Tremolo √ 113 0 127 0~63=Off ; 64~127=On *
(FBV) Modulation √ 50 0 127 0~63=Off ; 64~127=On *
(FBV) Delay √ 28 0 127 0~63=Off ; 64~127=On *
(FBV) Reverb √ 36 0 127 0~63=Off ; 64~127=On *
(FBV) Tap √ 64 0 127 Momentary 127
Duet Manual Page 3 Tuesday, October 1, 2002 9:36 PM