Link electronic 101/201 Switch User Manual


 
10
Figure 4. Rear Panel Description
Ÿ LINE
V.90 modem RJ-11 for PSTN analog telephone line
Ÿ PHONE
V.90 modem RJ-11 for external telephone set
Ÿ COM2
2
nd
RS-232 port connecting with external modem or ISDN-TA
Ÿ Node
10/100Mbps LAN port connecting with PC or Mac
Ÿ Hub
10/100Mbps LAN port connecting with Hub port
Ÿ Console
RS-232 console port operating at 9600-baud
Ÿ AC 9V
External AC power adaptor input
2.3 System Requirements
Ÿ A 80486 or greater processor computer equipped with a 10Base-T or
10/100Base-T Ethernet card
Ÿ 16-bit, small-font monitor settings or above are suggested
Ÿ TCP/IP network protocol for each PC
Ÿ At least one computer for configuration
Ÿ UTP network cable with RJ-45 connector
Ÿ Microsoft Internet Explorer 4.0 or later, or Netscape Communicator 4.0 or
later browser¡]For Web configuration¡^
Ÿ At least one modem or ISDN terminal adapter
Ÿ A dedicated phone line or ISDN line