Link electronic 101/201 Switch User Manual


 
18
Note¡GIf there is any other DHCP server in the Network, please select Specify an IP
address and use the default value 192.168.1.***¡]*** is between 2 and 252¡^, set
Subnet Mask 255.255.255.0 , Gateway IP 192.168.1.1 and DNS for configuration.
After finishing TCP/IP set up, reboot the computer and run the browser to configure the
AcerRouter 101/201. Afterwards, set up other PC in the LAN according to above
procedures.
3.3 AcerRouter 101/201 settings
1. Start your web browser (Netscape Navigator 4.0 or Microsoft Explorer4.0 later or
other Java compatible browser) and type 192.168.1.1 in the address and press
ENTER key on your keyboard. The Username and Password Required
window will pop up. Leave the User Name blank and fill in the Password admin .
Then click OK to enter Web Management.
The Quick Setup window pops up consequently.