Filter
Top Products
EtherFast
®
10/100 LAN Cards
20
8. Windows will finish installing the software onto your PC. Click the Finish
button.
9. When asked if you want to restart your PC, remove the Driver Disk and
click the Yes button. If you are using the Windows CD-ROM, leave it in
your PC. You may need it later.
10. If Windows does not ask you to restart your PC, click the Start button,
choose Shut Down, choose Restart, then click the Ye s button.
The Windows 98 driver installation is complete. Please continue on to the
next section, which will provide instructions for configuring Windows 98’s
network protocol. Consult your Windows documentation for your network
configuration information if necessary.
NNoottee::
From this point on, you must provide Windows with a User name
and Password every time you are prompted to do so. Remember to click
the
OOKK
button to properly log into Windows. If you click the
CCaanncceell
but-
ton or press the
EEssccaappee ((EESSCC))
key, you will not log into the network.
Linksys Instant EtherFast
®
Series
19
6. A window will open, notifying you that Windows is searching for the Linksys
LNE100TX Fast Ethernet Adapter driver. When the window notifies you that
it is ready to install the driver, click the Next button.
7. Windows will begin copying the EtherFast Card’s driver files to your PC.
Refer to the chart below to help guide you through the process.
• If your PC asks for the Linksys
Setup or Driver Disk
• If you are asked to supply
your Windows 98 Installation
Files or Disks
• If you are asked for a file that
includes “LNE100TX” in its
name
• If you receive a Version
Conflict error
1. Click
OOKK
.
2. Ensure that the
DDrriivveerr DDiisskk
is in your PC’s flop-
py drive.
3. Type “a:\” in the “Copy files from:” box.
4. Click
OOKK
.
1. Click
OOKK
.
2. If you have a
WWiinnddoowwss 9988 CCDD--RROOMM
, type
“d:\win98” in the “Copy files from:” box, where
“d:” is your CD-ROM drive.
3. If you
don’t
have a
WWiinnddoowwss 9988 CCDD--RROOMM
,
type: “c:\windows\options\cabs”.
4. Click
OOKK
.
1. Insert the
DDrriivveerr DDiisskk
into your PC’s floppy
drive.
2. Type “a:\” in the “Copy files from:” box.
3. Click
OOKK
1. Choose to keep the newest version of the file
by clicking
YYeess
.
If you press Skip or Cancel, the drivers will not be installed!