Filter
Top Products
13
Instant Broadband
TM
Series
12
EtherFast
®
Cable Modem with USB and Ethernet Connection
many manufacturers use c:\windows\options\install as the path. Try enter-
ing this path into the box. If no files are found, check your computer’s doc-
umentation or contact your computer manufacturer for more information.
4. When Windows finishes installing the driver, click Finish.
5. When asked if you want to restart your PC, remove all disks and click Yes .
If Windows does not ask you to restart your PC, click the Start button,
choose Shut Down, choose Restart, then click Yes.
The Windows Millennium driver installation is complete. Return to the
section on Connecting Using the USB Port to finish the set up.
1. Start up your PC in Windows Millennium. Windows will detect new hard-
ware connected to your PC.
2. Insert the Setup Utility CD into your CD-ROM drive. When Windows
asks you for the location of the best driver, select Automatic search for a
better driver (Recommended) and click the Next button.
3. Windows will begin installing the driver for the modem. At this point, the
installation may require files from your Windows Millennium CD-ROM. If
prompted, insert your Windows Millennium CD-ROM into your CD-ROM
drive and enter d:\win9x in the box that appears (where “d” is the letter of
your CD-ROM drive). If you were not supplied with a Windows 98 CD-
ROM, your Windows files may have been placed on your hard drive by
your computer manufacturer. While the location of these files may vary,
Installing the USB Driver for Windows Millennium