Filter
Top Products
EtherFast
®
Layer 3 Management 24-Port 10/100 + 2-Port Gigabit Ethernet Switch
Subnet Information
The Subnet Information screen displays information about the IP interface
for VLANs configured on this Switch.
•IP Address - The IP address associated with the specified VLAN inter-
face.
•Subnet Mask - A template that identifies the address bits in the host
address used for routing to specific subnets.
•VLAN - The VLAN associated with this IP interface.
•(Ports) - The ports on the Switch.
Read the numbers vertically; they range from 1-26. For each port
number, there are two choices: “S” or “P.” Use the spacebar to
scroll through the choices.
The letter “S” indicates a static entry.
The letter “P” indicates the port is a static entry, and the port’s PVID
is set to this VLAN ID.
Select Apply to make changes. Select OK to return to the previous panel.
Select Prev Page to view the previous page. Select Next Page to view the next
page. To display a specific page, set the page number in the Page field and then
press Apply.
99
Instant EtherFast
®
Series
Select Apply to make changes. Select OK to return to the previous panel.
Select Prev Page to view the previous page. Select Next Page to view the next
page. To display a specific page, set the page number in the Page field and then
press Apply.
IP Menu
The IP Menu displays information regarding a variety of IP settings, including
subnets, ARP table, routing table, and multicast groups. (Only available in mul-
tilayer mode).
• Subnet Information - Displays settings for the IP interface of VLANs.
• ARP Table - Shows the IP-to-MAC addresses discovered by ARP.
• Routing Table - Shows the routes through which all recognized Ethernet net-
works (and the corresponding VLAN) can be reached.
• Multicast Table - Displays all the multicast groups active on this Switch,
including the multicast IP address and the corresponding VLANs.
• OSPF Table - Displays the OSPF routing information.
Select OK to return to the previous panel.
98