Filter
Top Products
Instant GigaCD Server
3
Getting to Know the EtherFast
Instant GigaCD Server
The Instant GigaCD Server’s Rear Panel
The rear panel of the Server is where all of the Servers connections are made.
Power Switch The power switch is a spring-loaded soft
switch for turning the power to the Server on
and off. If the Server is not powered on, press-
ing the power switch will initiate the Server’s
startup process. Pressing the power switch
while the Server is turned on will begin the
Server’s internal shut-down process.
Power Port The Power Port is where you will connect the
included AC Power cord.
10/100BaseTX Port Use this port to connect the Server to Your
Network.
100BaseTX LED (amber) This will illuminate when a successful
100BaseTX connection is made to Your
Network through the 10/100BaseTX port.
EtherFast Series
Package Contents
• Linksys EtherFast Instant GigaCD Server
• UTP Network Cable
• Power Cord
• Setup CD-ROM
• User Guide and Registration Card
System Requirements
• One PC with an installed 10Mbps, 100Mbps, or 10/100 Mbps Ethernet card
• TCP/IP network protocol for each PC
• Microsoft Internet Explorer or Netscape Navigator, or compatible browser,
versions 4.0 or later.
2