Filter
Top Products
Instant GigaCD Server
98
Press Next to continue.
TCP/IP:
DHCP Client -
Obtain IP Address You can enable this setting, if there is a DHCP or
Automatically Bootp server connected to your LAN, to obtain the
Server’s IP Address. Since this is a Server, however, it
is best to use a Fixed IP Address.
Fixed IP Address You can enter your Fixed IP Address here.
IP Address Quick Setup will suggest unused values from within
the address range used on this segment of the LAN. If
the suggested value is currently being utilized by a
device that has been turned OFF, change the address to
one that is not being used.
Network Mask This should be use same values as the other PC’s on
your LAN. The default value for the Server is
255.255.255.0.
Gateway This should also be use same values as the other PC’s
on your LAN.
Enable DHCP Server If selected, the Server will provide IP Addresses and
related data to PCs on the network. PCs can only
request such data if they are setup as DHCP Clients.
See page 26, Windows Client Setup, for more informa-
tion.
EtherFast Series
4. The main screen will appear as shown below. Select the virtual CD-Rom
to be configured. If prompted for a password, click OK. By default, there is
no password.
5. Select the SETUP icon and start Quick Setup.
Server Properties:
Server Name This will show the default name which you can change
however you wish.
Comment Any optional comments can be placed here.
Date/Time Adjust the system’s time setting here.
Time Zone Adjust the time zone for your location here.