Filter
Top Products
Wireless-G Broadband Router with 2 Phone Ports
12
Chapter 5: Configuring the Router
Overview
Setup
• Basic Setup. Enter the Internet connection and network settings on this screen.
• DDNS. Enable the Router’s Dynamic Domain Name System (DDNS) feature on this screen.
• MAC Address Clone. If you need to clone a MAC address onto the Router, use this screen.
• Advanced Routing. On this screen, you can alter Network Address Translation (NAT), Dynamic Routing, and
Static Routing configurations.
Wireless
• Basic Wireless Settings. Enter the basic settings for your wireless network on this screen.
• Wireless Security. Enable and configure the security settings for your wireless network.
• Wireless Network Access. To permit or deny wireless network access for specific devices, set up MAC
address filtering.
• Advanced Wireless. Advanced users can alter data tranmission settings on this screen.
Security
• Filter. To block specific users from Internet access, you can set up IP address, port, and MAC address
filtering.
• VPN Passthrough. To enable or disable IPSec, PPPoE, and/or PPTP Passthrough, use this screen.