Filter
Top Products
EtherFast
®
Wireless-Ready USB PrintServer
12
Instant EtherFast
®
Series
11
5. Driver installation is now completed, but the Print Driver still needs to be
configured. The PrintServer will not function properly until the Print
Driver is configured. Check the box beside Configure Print Driver Now,
and click the Finish button to continue.
6. Before setting up and configuring the Printer Port, follow the directions on
the screen, as shown in Figure 4-10, and click the OK button to continue.
3. Click Next to accept the default Destination Directory, shown in Figure 4-7
(recommended). If you choose to utilize another directory, click the Browse
button, and choose the appropriate directory. Then, click the Next button.
4. The following screen, shown in Figure 4-8, will assign a Program Folder
to the Windows Taskbar. The default Program Folder is the Linksys
PrintServer Driver. If you would like to use another name for the Program
Folder, type it in the Program Folders field or select one from the Existing
Folders field. Click the Next button to continue.
Figure 4-7
Figure 4-8
Figure 4-9
Figure 4-10