Filter
Top Products
9
Chapter 5: Setting Up the Wireless-G Range Expander
Wireless-G Range Expander
Chapter 5: Setting Up the Wireless-G Range Expander
Now that you've placed the Range Expander within your wireless network, you are ready to begin setting it up.
This Setup Wizard will take you through all the steps necessary to configure the Range Expander.
1. Insert the Setup Wizard CD into your PC's CD-ROM drive. Your PC must be communicating with your wireless
network to set up the Range Expander.
2. The Setup Wizard's Welcome screen should appear on your monitor. If it does not, this means the Setup
Wizard is not automatically running as it should. Start the Setup Wizard manually by clicking the Start button,
selecting Run, and typing d:\setup.exe (where "D" is your PC's CD-ROM drive). Click the Setup button to
continue this Setup Wizard. Clicking the User Guide button opened this Guide. To exit this Setup Wizard, click
the Exit button.
Figure 5-1: The Setup Wizard’s Welcome screen
NOTE: You won’t need to use the Setup Wizard, if
you set up the Range Expander with the Auto
configuration button. The Auto configuration button
can be used to setup the Range Expander simply
when you have disabled WEP security on your
wireless network.