Filter
Top Products
Embedded SATA Software RAID 5-1
Copyright © 2004 by LSI Logic Corporation. All rights reserved.
Chapter 5
Hyper Configuration
Utility
HYPERCFG is a command line utility for ICH6R software. This chapter details
the product features in these sections:
• Section 5.1, “General Description,” page 5-1
• Section 5.2, “Installing HyperCFG,” page 5-2
• Section 5.3, “Using HyperCFG,” page 5-2
• Section 5.4, “Configuration File,” page 5-8
• Section 5.5, “Return Codes on Error Condition,” page 5-10
5.1 General Description
HYPERCFG is a command line utility for SATA RAID. The main features
supported in this utility are:
• ability to create RAID arrays
• ability to save RAID configuration information to file
• ability to display RAID configuration data
• ability to configure RAID from file
• display of RAID option ROM version
• ability to read and display specified sector from drive
• ability to add error code information
• ability to dump identify device command packet
• self-monitoring analysis and reporting technology (S.M.A.R.T.) option
• ability to set disk coercion
• ability to rebuild failed drives