Filter
Top Products
Embedded SATA Software RAID 6-1
Copyright © 2004 by LSI Logic Corporation. All rights reserved.
Chapter 6
Spy Service
This chapter describes the Spy Service program and contains the following
sections
• Section 6.1, “Starting or Stopping Spy Service under Windows 2000, XP,
or 2003,” page 6-1
• Section 6.2, “Installing Spy Service under Linux,” page 6-3
• Section 6.3, “Installing and Running Spy Service under Novell NetWare,”
page 6-3
• Section 6.4, “Uninstalling Spy Service,” page 6-4
• Section 6.5, “Spy Service Icon,” page 6-4
The Spy Service program looks for errors, failed drives, and status changes. It
can mark drives as failed after the error threshold is reached and start automatic
rebuilds. It runs in the background of the Embedded SATA Console.
When operating under Windows, Spy enables the self-monitoring analysis and
reporting technology (S.M.A.R.T.) on all of the hard drives at startup and polls
for any status changes in the drives every 60 minutes. S.M.A.R.T. monitors hard
drives for drive failures.
6.1 Starting or Stopping Spy Service under Windows 2000, XP, or
2003
You can use the Control Panel to access the option to start or stop Spy Service.
Perform the following steps to start or stop Spy Service.
Step 1. Click on Start > Settings > Control Panel.
The screen shown in Figure 6.1 displays.