Filter
Top Products
34
5. At this point, do one of the following:
■ Go to Step 3 of the next procedure to program another button for this
extension.
■ Press c and go to Step 2 of any button programming
procedure in this section to program a button for a different extension.
■ Press f00 to exit.
Do Not Disturb (F01)
Used in conjunction with either automatic VMS cover or manual VMS cover,
this button lets a subscriber send calls immediately to his or her mailbox
(instead of ringing the extension first).
To program a Do Not Disturb (DND) button as specified on Form C:
1. Press
f00ssc.
2. Enter the number of the extension to be programmed.
3. Press a programmable button with lights.
4. Press
f01.
5. At this point, do one of the following:
■ Go to Step 3 of the next procedure to program another button for this
extension.
■ Press c and go to Step 2 of any button programming
procedure in this section to program a button for a different extension.
■ Press f00 to exit.
Voice Mailbox Transfer (F14)
This button lets any system user transfer calls directly to PARTNER Voice
Messaging without ringing the extension first.
To program a Voice Mailbox Transfer (VMBox) button as specified on Form C:
1. Press
f00ssc.
2. Enter the number of the extension to be programmed.
3. Press a programmable button.
4. Press
f14.