Lynx L-325 Network Router User Manual


 
4-Port ADSL Router Lynx L-325
User Manual
20
Version 1.0
Document #: BD-AU0007-10
The next step is to configure the Network Address Translation
(NAT) settings. For the example, NAT will be enabled. Leave the
remaining fields at default and click on Next to continue.
You can configure the DSL Router IP address and Subnet Mask
for the LAN interface to correspond to your LAN’s IP Subnet. If
you want the DHCP server to automatically assign IP addresses,
then enable the DHCP server and enter the range of IP addresses
that the DHCP server can assign to your computers. Disable the
DHCP server if you would like to manually assign IP addresses.
Click on Next to continue.