4-Port ADSL Router Lynx L-325
User Manual
36
Version 1.0
Document #: BD-AU0007-10
Quality of Service
You can configure the Quality of Service to apply different
priorities to traffic on the router. Click on Add to view the
Add
Network Traffic Class Rule
screen.
This screen allows you to add a network traffic class rule.
Procedures for this setup are as follows—
1. Give a name to this traffic class.
2. Assign a priority level—low, medium, and high—to this traffic
class.
3. Select an IP precedence from the range of 0-7.
4. Enter an IP Type of Service from the following selections—
• Normal Service
• Minimize Cost
• Maximize Reliability
• Maximize Throughput
• Minimize Delay
5. Last, enter the traffic conditions for the class such as the
protocol (TCP / UDP, TCP, UDP, or ICMP) to be used.
Click Save / Apply to save the settings.