Lynx L-325 Network Router User Manual


 
4-Port ADSL Router Lynx L-325
User Manual
6
Version 1.0
Document #: BD-AU0007-10
Installing the Router
Connect the ADSL Line and Telephone
An RJ-11 cable will be connected to the wall phone jack and the
line-end of the splitter. Connect another RJ-11 phone cable from
the modem-end of the splitter to the port labeled “line” on the
router. A third RJ-11 phone cable will be needed to connect the
telephone to the phone-end of the splitter.
NOTE: See connections on the installation diagram.
Connect the PC to the Router
Use the Ethernet cable to connect your computer directly to the
router. Connect one end of the Ethernet cable to one of the ports
labeled LAN on the rear panel of the router and connect the other
end to the Ethernet port of your computer. Attach any additional
PCs to the router using RJ-45 cables to the port labeled LAN on
the rear panel of the router.
Connect the Power Adapter
Complete the process by connecting the AC power adapter to the
POWER connector on the back of the device and plug the adapter
into a wall outlet or power strip. Then turn on and boot up your
PC and any LAN devices, such as hubs or switches, and any
computers connected to them.