Filter
Top Products
4-Port ADSL Router Lynx L-325
User Manual
48
Version 1.0
Document #: BD-AU0007-10
Configure System Log
If the log is enabled, the system will log selected events:
Emergency, Alert, Critical, Error, Warning, Notice, Informational,
and Debugging. All events above or equal to the selected log
level will be logged and displayed.
If the selected mode is “Remote” or “Both”, events will be sent to
the specified IP address and UDP port of a remote system log
server. If the selected mode is “Local” or “Both”, events will be
recorded in the local memory. Select the desired values and click
on the “Save/Apply” button to configure the system log options.
SNMP
SNMP is Simple Network Management Protocol that provides a
means to monitor status and performance as well as set
configuration parameters. It enables a management station to
configure, monitor and receive trap messages from network
devices.