Filter
Top Products
5.0 TROUBLESHOOTING
This chapter provides solutions to problems that may occur during the
installation and operation of the MIH-130A XRouter Pro.
1. The Link LED is off.
-Be sure that all connectors are firmly plugged-in.
-Be sure that the power adapter is plugged into an electrical out-
let.
2. Can't connect to MIH-130A XRouter Pro via Web browser.
-Be sure that the IP address “192.168.1.1” has been correctly
entered in the URL
field.
-Be sure the network cable connection and LAN LED indicator on
the XRouter Pro
-Check the TCP/IP setup on your client. Type "winipcfg" on DOS
prompt under Windows 95 or open the TCP/IP control panel on
the Mac OS platform. The client should get an IP address of
“192.168.1.x” (where "x" is from 1 to 252.)
3. Can't connect to MIH-130A XRouter Pro to the Internet.
-Check whether your ISP requires the use of the MAC address for
the router. Some ISPs require the MAC address the network
connection. Contact your provider with the correct MAC address
if it is necessary.
-If you are using the Static IP address provides by your ISP, verify
that the address is correct and is correctly entered in the URL
field.
-Check your cabling among all devices.
33
Chapter 5 - TROUBLESHOOTING