Marantz PD5020D Computer Monitor User Manual


 
31
Setting the gray level for the sides of the screen
Use this procedure to set the gray level for the parts on the
screen on which nothing is displayed when the screen is
set to the 4:3 size.
Example: Adjusting the “GRAY LEVEL”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select FUNCTION, then
press the PROCEED button.
The FUNCTION screen appears.
2. Use the and buttons to select GRAY LEVEL.
FUNCTION
: ON
: 1
: OFF
: 3
: ON
: 1
SEL. ADJ. RETURN
EXIT
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
RGB3 ADJ.
LONG LIFE
RESET
3. To adjust the “GRAY LEVEL”...
Use the
and
buttons to adjust the GRAY LEVEL.
FUNCTION
: ON
: 1
: OFF
: 9
: ON
: 1
SEL. ADJ. RETURN
EXIT
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
RGB3 ADJ.
LONG LIFE
RESET
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
GRAY LEVEL
This adjusts the brightness of the black (the gray level)
for the sides of the screen.
The standard is 0 (black). The level can be adjusted
from 0 to 15. The factory setting is 3 (dark gray).
Restoring the factory default settings
Select RESET under the function menu. Note that
this also restores other settings to the factory defaults.
Setting the picture to suit the movie
The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I
(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]
Example: Setting the “CINEMA MODE” to “OFF”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select FUNCTION, then
press the PROCEED button.
The FUNCTION screen appears.
2. Use the and buttons to select CINEMA MODE.
FUNCTION
: ON
: 1
: OFF
: 3
: ON
: 1
SEL. ADJ. RETURN
EXIT
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
RGB3 ADJ.
LONG LIFE
RESET
3. To set the CINEMA MODE to “OFF” ...
Use the
and
buttons to select OFF.
The mode switches as follows each time the
or
button is pressed:
ON OFF
FUNCTION
: ON
: 1
: OFF
: 3
: OFF
: 1
SEL. ADJ. RETURN
EXIT
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
RGB3 ADJ.
LONG LIFE
RESET
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
CINEMA MODE
ON...................Automatic discrimination of the
image and projection in cinema mode.
OFF................... Cinema mode does not function.
Restoring the factory default settings
Select RESET under the function menu. Note that
this also restores other settings to the factory defaults.