Filter
Top Products
9
RX9001 User Guide
Configuration switch: 1
Inserting a Multimedia Server in the Network
You can add an Escient Media Server or an Imerge Sound Server to your network.
1 Connect the Server to the router.
2 Open Wizz.it Ex.
3 Open the configuration file.
4 To insert a Multimedia Server in the configuration file, click the ‘Insert Escient Media
Server’ button or the ‘Insert Imerge Sound Server’ button.
5 Open the Multimedia Server Properties.
6 Adjust the settings of the Multimedia Server:
• If the Multimedia Server has a fixed IP-address, fill in that IP-address.
• If it has a dynamic IP-address, fill in its host name.
Connecting the Extender to the Network
The Extender is normally ready for use and does not need to be configured. The settings need only
be adjusted in case you wish to operate the Extender with a fixed IP-address, or if there is more
than one Extender in the Wireless Network.
Note Before you start using or configuring the Extender, check if any firmware updates are available
in the Downloads section on http://www.marantz.com in the Home Entertainment section of
your region.
Refer to the chapter ‘Firmware Update’ on page 13 for further details.
Using the Extender
1 Connect the Extender to the router with a straight Ethernet cable.
2 Set the Extender ID switch to 1 or to an ID that is not yet used by another Extender in
the Wireless Network.
3 Set the Configuration switch to 1 for use:
Extender
Straight
Ethernet cable
Router
RX9001_SG_EFS.qxd 29-03-2007 16:29 Pagina 12