Filter
Top Products
31
ENGLISH
You can make the following settings.
– Keystone V / H
Corrects the trapezoidal shape of the projected image. (For details, “Keystone Correction”
☞
pg. 19.)
– Auto Adjust
Use this mode for RGB input when RGB System on the System menu is set to “Auto”.
Yes : The Picture Shift V/H, vertical/horizontal resolution and Phase of the RGB signal are set automatically.
No : Disables automatic image adjustment. Set Picture Shift V/H, Size V/H and Phase yourself.
Select “Yes” with the
1 and 2 buttons and press the ENTER button.
– Picture Shift V / H
Shifts the position of the image. Picture Shift V shifts the image up/down, while Picture Shift H shifts the image left/right.
– Size V / H
Sets the vertical and horizontal size of the image.
– Phase
Sets the phase of the analog RGB signal from the computer and the clock phase of the A/D converter. Adjust the image to
where it looks the clearest.
❖ How to Operate the Display Menu
1. Select the desired menu item and press the 2 button.
The setting item will appear on the screen.
2. Use the 1 and 2 buttons to set the item.
3. Press the 3 button to enter the setting and return to menu item selection.
INPUT ASPECT
MENU V-MUTE
ENTER
3.
1, 2
INPUTPATTERN
ENTER
3.
1, 2
Keystone V (Electronic vertical
keystone correction)
Keystone H (Electronic horizontal
keystone correction)
Auto Adjust
Picture Shift V
Picture Shift H
Size V
Size H
Phase
Menu item Adjustment range
-50
-50
-50
-50
0
50
50
50
50
31
-30
-30
30
30
Yes / No
Picture Adjust
Menu Standard 1
Setting
Display
System
Config
Trigger 2
Preset
Keystone V
Keystone H
Auto Adjust
Picture Shift V
Picture Shift H
Size V
Size H
Phase
0
0
0
0
0
0
16
Display