Martin Fireplaces 2518 Network Card User Manual


 
25
appendix c
C
OMMAND
TABLE
Function To execute:
Save scene Press [Store]. Press scene no.
Save flash scene Press [Store]. Press [Midi].
Execute flash scene Press [Midi].
Set auto-trigger Press [Auto]. Wait. Press [Auto].
Toggle music trigger Press [Music].
Toggle show mode Press-and-hold [Up] + [Down].
Set show mode banks Press [Up] or [Down].
Set show mode loops Press a scene button from 1 to 6.
Blackout Press [Blackout].
Standby Press-and-hold [Blackout].
Clear blackout or standby Press [Blackout].
Save auto-start configuration Press-and-hold channel master.
Clear auto-start configuration Toggle tandem mode on/off.
Toggle tandem mode
Put both controllers on standby.
Press [Blackout] on bottom controller.
Press [Blackout] on top controller.
Quickly press-and-hold top 3 channel buttons.
Create MIDI-callable scene
Select scene.
Press-and-hold [Midi].
Press [Store].
Generate MIDI code.
Create MIDI trigger
Press-and-hold [Midi].
Press [Auto].
Generate MIDI code.
Delete MIDI function
Press-and-hold [Midi].
Press [Music].
Generate MIDI code.
Lock/unlock memory
Put (top) controller in standby.
Press [Blackout].
Quickly press-and-hold fourth + sixth channel buttons until
“LO” (lock) or “OF” (off) is displayed.
Delete all scenes
Put controller in standby.
Press [Blackout].
Quickly press-and-hold [Store] + [Up]
Delete all MIDI functions
Put controller in standby.
Press [Blackout].
Quickly press-and-hold [Store] + [Down]
Table 7: Command summary