Filter
Top Products
9-10
Q Arranging the TP Power Cable and Attaching the TP/LCD Sheet
Q Setting the Inverter and Arranging the Inverter Cable
1. Insert the Inverter to the Inverter Case, and connect the Inverter Cable to the Connector on the Inverter.
2. Fix the Connector of the Inverter Cable using the Tape.
0~2mm
0~2mm
0~1mm
TP Power Cable
Cable Sheet
Tape
Sheet
Match the end of the Sheet
to the end of the Connecter.
Ensure the Tape does not cover the Connecter port.
Connect the Connector.
Pass the Cables over
the Conductive Cloth.
Fold it back and attach
to the side suface.
Corner of the Conductive Cloth.
No protrusion.
B
A
Arrange the Cable A and B
coming out of the Connector
part in the same length.
Ensure the Tape and Cable Sheet
do not come out of the metal part.
Safety Working
Safety Working
Safety Working
Safety Working
Safety Working
Inverter
Inverter
Case
Inverter Cable
Inverter Case
Match the end of
the Inverter Case
to the end.
Attach the Inverter on
the two-sided tapes.
Match the end of the Inverter
to the mark.
Pass the Cable between the LCD and the Inverter Case.
Ensure the portion with
the Black Tape stays on
the outlet.
Ensure the Cables do not
come over the "a" line.
(Otherwise they push up
the front surface.)
"a" line
1. Avoid any kink, twist or stress on the components.
2. Do not reuse the Inverter once you removed it
from the Inverter Case.
Tape
0~1mm
Fold it back and fix it.
Pass the Cables through the notch.
Fit the surplus length
under the LCD.
Safety Working
Safety Working
Safety Working
Tape