Filter
Top Products
Pressure Systems, Inc. Model 9116 User’s Manual
Page 77 www.PressureSystems.com
Note
Coefficients used for typical applications are shown in BOLD type.
All other coefficients are typically not used outside of advanced
diagnostic functions.
cc Transducer Coefficients Description
Datum
Type
00 Re-zero Cal Adjustment (offset) term FLOAT
01 Span Cal Adjustment (gain) term FLOAT
02
Dynamic EU Conversion coefficient c0
FLOAT
03
Dynamic EU Conversion coefficient c1
FLOAT
04
Dynamic EU Conversion coefficient c2
FLOAT
05
Dynamic EU Conversion coefficient c3
FLOAT
06 Reserved for Factory Use ---
07
User Defined Date field (see end-of-table note)
INTEGER
08 Date of Factory Calibration (see end-of-table note) INTEGER
09
Transducer Manufacturing Reference number
INTEGER
0A
Transducer Full-Scale Range code (see Appendix F)
INTEGER
0B-0F Temperature 1, Pressures 1-5 voltages FLOAT
10-14 Temperature 2, Pressures 1-5 voltages FLOAT
15-19 Temperature 3, Pressures 1-5 voltages FLOAT
1A-1E Temperature 3, Pressures 1-5 voltages FLOAT
1F-23 Temperature 5, Pressures 1-5 voltages FLOAT
24-28 Temperature 6, Pressures 1-5 voltages FLOAT
29-2D reserved for future use (temperature 7) FLOAT
2E Temperature 1 Temperature Output voltage at 0 psi FLOAT
2F Temperature 2 Temperature Output voltage at 0 psi FLOAT
30 Temperature 3 Temperature Output voltage at 0 psi FLOAT
31 Temperature 4 Temperature Output voltage at 0 psi FLOAT
32 Temperature 5 Temperature Output voltage at 0 psi FLOAT