Filter
Top Products
15
SETTING THE MENU (CONTINUED)
While in the PC mode and connected to a PC via the VGA
connector, follow Steps 1 and 2 on the previous page to
enter the menu as shown. Select Advanced using the
CHANNEL/Navigation UP
1 or DOWN 2 button and then
press the VOLUME UP/Navigation Right button 3.
1
Select an Advanced option (see below) using the
CHANNEL/Navigation UP
1 or DOWN 2 button, then press the
VOLUME UP/Navigation Right button
3 to select it. Set/adjust these
settings as desired:
AUTO ADJUST: Select and then use the CHANNEL/Navigation UP
1 or DOWN 2 button to select YES, then press the VOLUME
UP/Navigation Right button
3 to have the unit automatically fit the
computer window fully on the screen.
IMAGE POS. (Position): Select and then adjust the position of the
computer image on the screen using the CHANNEL/Navigation
UP
1/DOWN 2 buttons and VOLUME UP/Navigation
Right
3/VOLUME DOWN/Navigation Left 4 buttons.
PHASE: Select and then by using VOLUME UP/Navigation Right
3/VOLUME DOWN/Navigation Left 4 buttons to adjust the phase.
H STRETCH: Select and then by using VOLUME UP/Navigation
Right
3/VOLUME DOWN/Navigation Left 4 buttons to adjust the
Horizontal Stretch the computer image on the screen
.
AUTO COLOR:
Select and the color will be automatically adjusted.
NOTE: When finished, press the MENU button repeatedly to exit
the menus.
2
3
1
2
3
1
2
4
SETTING THE ADVANCED OPTIONS (PC MODE ONLY)
While in the
A
TSC mode, follow Steps 1 and 2 on the
previous page to enter the menu as shown. Select Format
using the CHANNEL/Navigation UP
1 or DOWN 2 button
and then press the VOLUME UP/Navigation Right button
3.
1
Select the desired format (Squeeze, Letterbox or Crop) using the
CHANNEL/Navigation UP
1 or DOWN 2 button, then press the
VOLUME UP/Navigation Right button
3 to select it.
SQUEEZE: Wide-screen programs are shown on the screen.
LETTERBOX: Wide-screen programs are shown on the screen,
but have black bars on the top and bottom of the screen.
CROP: Wide-screen programs are shown on the screen with 4:3
aspect ratio, some part of the screen may be cut automatically
.
NOTE: This function is for wide-screen
TV programs only
, there
will be no function if the program is broadcast with 4:3 format.
3
1
2
2
3
1
2
SETTING THE FORMAT (ATSC MODE ONLY)
NOTE:
•
If no buttons are pressed for approx. 10 seconds, the menu will disappear automatically
.