Metrologic Instruments IS4910 Series Scanner User Manual


 
27
IS4910
D
EVICE
D
RIVER
Value Type Description
GPIO_CIF_FV
DWORD
Specifies the GPIO pin connected to the “VSYNC” signal.
If it’s not specified the driver fails to load.
GPIO_CIF_LV
DWORD
Specifies the GPIO pin connected to the “HSYNC” signal.
If it’s not specified the driver fails to load.
GPIO_CIF_PCLK
DWORD
Specifies the GPIO pin connected to the “PCLK” signal.
If it’s not specified the driver fails to load.
GPIO_CIF_DD0
DWORD
Specifies the GPIO pin connected to the “D0” signal.
If it’s not specified the driver fails to load.
GPIO_CIF_DD1
DWORD
Specifies the GPIO pin connected to the “D1” signal.
If it’s not specified the driver fails to load.
GPIO_CIF_DD2
DWORD
Specifies the GPIO pin connected to the “D2” signal.
If it’s not specified the driver fails to load.
GPIO_CIF_DD3
DWORD
Specifies the GPIO pin connected to the “D3” signal.
If it’s not specified the driver fails to load.
GPIO_CIF_DD4
DWORD
Specifies the GPIO pin connected to the “D4” signal.
If it’s not specified the driver fails to load.
GPIO_CIF_DD5
DWORD
Specifies the GPIO pin connected to the “D5” signal.
If it’s not specified the driver fails to load.
GPIO_CIF_DD6
DWORD
Specifies the GPIO pin connected to the “D6” signal.
If it’s not specified the driver fails to load.
GPIO_CIF_DD7
DWORD
Specifies the GPIO pin connected to the “D7” signal.
If it’s not specified the driver fails to load.
GPIO_TRIGGER
DWORD
Specifies the GPIO pin connected to the “Trigger” signal.
If it’s not specified the driver fails to load.
GPIO_ILLUM
DWORD
(Optional) Specifies the GPIO pin connected to the “Illum_ON”
signal. No default value.
GPIO_AIMER
DWORD
(Optional) Specifies the GPIO pin connected to the “Aimer”
signal. No default value.