MGE UPS Systems 3200C Power Supply User Manual


 
34007532EN/AA - Page 13
2. Installation
2.4 Connection to the RS232 or USB communications port (optional)
1 - Connect the RS232 30 or USB 31
communications cable to the serial port or
the USB port on the computer.
2 - Connect the other end of the
communications cable 30 or 31 to the
RS232 2 or USB 3 communications
port on the UPS.
The UPS can now communicate with all
MGE UPS SYSTEMS supervision, set-up or
safety software.
30
31
The RS232 and USB communications ports cannot operate simultaneously.
2.5 Installation of the communications-card option
It is not necessary to shut down the UPS to
install the communications card:
1 - Remove the slot 1 cover secured by
two screws.
2 - Insert the card in the slot.
3 - Secure the card with the two screws.
Slot for the
communications-
card option.
3
2
1