Filter
Top Products
3. Operations
Displaying outlet status
The Status command displays the on/off status of one or more outlets. The command displays the status of only those
outlets for which the current username has power control access.
This display includes the outlet absolute and descriptive names, the Outlet State reported to the Switched PDU
by the outlet and the current Control State being applied by the Switched PDU. If you do not specify any
parameter with this command, the status of all accessible outlets is displayed.
NOTE: If the user has access to more than 16 total outlets, the Status command will display the first 16 outlets
with a prompt to view the remaining outlets.
For more information on outlet and control state values, see Outlet Control on page 14.
To display on/off status of one or more outlets:
At the Switched PDU: prompt, type status, followed by an outlet name, and press Enter, or
Type
status, followed by a group name, and press Enter, or
Type
status and press Enter.
Examples
The following command displays the on/off status of the outlet named FileServer_1:
Switched PDU: status FileServer_1<Enter>
Outlet Outlet Outlet Control
ID Name State State
.A3 FileServer_1 On On
The following command displays the on/off status of all accessible outlets:
Switched PDU: status<Enter>
Outlet Outlet Outlet Control
ID Name State State
.A1 DataServer_1 On On
.A2 WebServer_1 On On
.A3 FileServer_1 On On
.A4 On On
.A5 On On
.A6 On On
.A7 On On
.A8 On On
.A9 On On
.A10 On On
.A11 On On
.A12 On On
.A13 On On
.A14 On On
.A15 On On
.A16 On On
More (Y/es N/o):
The following command displays the on/off status for outlets in the group ServerGroup_1:
Switched PDU: status ServerGroup_1<Enter>
Group: ServerGroup_1
Outlet Outlet Outlet Control
ID Name State State
.A1 DataServer_1 On On
.A2 WebServer_1 On On
.A3 FileServer_1 On On
301-0399-4 Rev A. - Page 25