Filter
Top Products
M54E2 System Board Manual
Section 3: Installing the M54E2
3-8
Installing a PCI Peripheral Card
Micronics PCI slots accommodate all PCI peripherals that meet the PCI 2.0
specifications. Complete the following steps to install a PCI card:
1. Turn the computer system off and remove its cover.
2. Choose an unused PCI slot and remove the slot cover.
3. Insert the card with the bottom edge level to the slot. Never
insert the card at an angle.
4. Carefully push the card straight down, making sure the card is fully
inserted.
5. Replace the screw which holds the card into place.
6. Replace the computer cover.
7. Refer to the card’s documentation for additional instructions regarding
installation and software drivers.
Figure 3-3: Installing a PCI Card