Milan Technology MIL-SM2401M-STK Switch User Manual


 
140
7-2. Port Status
Link:
“Down” is “No Link”. “UP” is “Link”.
State:
Displays port status off or on depending on user setting. “Unlink” means
the port is offline or “off ”.
Auto Negotiation:
Displays the auto negotiation mode. There are three
selections: Auto, Force and Nway-force.
Speed Duplex:
Displays link speeds of 1000Mbps or 100Mbps or 10Mbps and
full duplex or half-duplex mode.
Flow Control:
Displays the flow control status as enabled or disabled in
full-duplex mode.
Back Pressure:
Displays the backpressure status as enabled or disabled in
half-duplex mode.
Bandwidth:
Displays the ports incoming and outgoing bandwidth.
Priority:
Displays the port static priority status as High or Low or Disable.
Port Security:
Displays the port security as enabled or disabled.
Config:
Displays the setting configured by the user.
Actual:
Displays the negotiation result.
Formatted:
Bullets and Numbering
Formatted:
Bullets and Numbering
Formatted:
Bullets and Numbering