Milan Technology MIL-SM2401M-STK Switch User Manual


 
1
1.
Introduction
The MIL-SM2401M-STK managed switch is a multi-port switch that can be used
to build high-performance switched workgroup networks. This switch is a
store-and-forward device that offers low latency for high-speed networking. The
switch is targeted at workgroup, department or backbone computing
environments.
The switch features a “store-and-forward “ switching scheme. This allows the
switch to auto-learn and store source addresses in an 8K-entry MAC address
table.
The
MDI
(Medium Dependent Interface) port is also called an "uplink port". The
MDI port does not cross transmit and receive lines, which is done by the regular
ports (MDI
-X
ports) that connect to end stations. In general,
MDI
means
connecting to another hub or switch while
MDIX
means connecting to a
workstation or PC. Therefore,
Auto MDI/MDIX
means that you can connect to
another switch or workstation without changing non-crossover or crossover
cabling.
The MIL-SM2401M-STK switch provides 24 auto-sensing 10/100Base-TX RJ-45
ports plus one dual-port expansion slot for optional fiber, gigabit fiber, or gigabit
UTP modules, which enables long-distance fiber connections or gigabit copper for
higher connection speeds.