Milan Technology MIL-SM2401M-STK Switch User Manual


 
85
Create 802.1Q VLAN
Select
<Edit>
to create a 802.1Q VLAN and add tagged /untagged member
ports to it.
1.
VLAN Name:
Type a name for the new VLAN using 15 alphanumeric
characters and no spaces.
2.
VLAN ID:
Type a VID (between 1~4096). The default is 1. There are 256
VLAN groups provided to configure.
3.
Protocol VLAN:
Press the
Space
key to choose the protocol type.
4.
Member:
Press the
Space
key to choose the VLAN member. There are
three selections:
UnTagged: This port is the member port of this VLAN group and
outgoing frames are NO VLAN-Tagged frames.
Tagged: This port is the member port of this VLAN group and
outgoing frames are VLAN-Tagged frames.
NO: The port is NOT member of this VLAN group.
5. Press
“ESC”
to return to the action menu line.
6. Select
<Save>
to save all configured values.
NOTE:
If the trunk groups exist, it will be displayed (ex: TRK1, TRK2…) after
port26. The user can configure select if it is the member of the VLAN or not.
Actions->
<Edit>:
Configures all items. When finished, pressing
ESC
returns to the action
menu line.
<Save>:
Saves all configured values.
<Previous Page>:
Displays previous page.
<Next page>:
Displays next page.