Milan Technology MIL-SM801G Switch User Manual


 
6
Rear Panel
The Console port and 3-pronged power plug are located at the Rear
Panel of the MIL-SM801P, MIL-SM801G and MIL-SM800P switches as
shown in Figure 2-5. The switches will work with AC in the range 100-
240V AC, 50-60Hz.
Figure 2-5. The Rear Panel of the switch
Console Port: Console management can be done through the Console
Port. It requires a direct connection between the switch and an end
station (PC) via a RS-232 cable.
Desktop Installation
Set the switch on a sufficiently large flat space with a power outlet
nearby. The surface where you put your switch should be clean,
smooth, level, and sturdy. Provide enough clearance around the
switch to allow attachment of cables, power cord and air circulation.