Filter
Top Products
44
4-4-4-1.Aggregator Setting
1. Group: Displays the trunk group ID.
NOTE: Before setting LACP support, you must first set the trunk group
using the Port / Trunk Configuration screen.
2. LACP: Press the Space key to enable or disable the LACP (Link
Aggregation Control Protocol) support. If enabled, the group is an LACP
static trunking group. If disabled, the group is a local static trunking
group.
3. LACP Work Port Num: The maximum number of ports that can be
aggregated at the same time. If the group is an LACP static trunking
group, the exceed ports are in standby mode and able to aggregate if
the work ports fail. If the group is a local static trunking group, the
number must be the same as group ports.
Actions->
<Edit>: Configures all items. When finished, pressing ESC returns to the
action menu line.
<Save>: Saves all configured values.
<Quit>: Exits this page and returns to the previous menu.