Milan Technology MIL-SM801G Switch User Manual


 
2
Features
Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet
Standards
Eight auto-sensing 10/100Mbps Ethernet RJ-45 ports
Automatic MDI/MDIX crossover for each 10BASE-T/
100BASE-TX port
One Fixed 100Mbps Fiber port SC/SC single-mode, MT-RJ,
VF-45 connector for MIL-SM801P series only
One Fixed 1000Mbps Gigabit Ethernet port for MIL-SM801G
series only
One Console port on the rear for switch software configuration
Half-duplex mode for back pressure and flow control for full-
duplex
Store-and-forward switching architecture
Automatic address learning
Static MAC table for a secured network
8K-entry MAC address table
2Mbit memory buffer sharing
Non-blocking full wire speed performance
LED-indicators for Power, 100M, LK/ACT, FD/COL
10-inch design for desktop or rackmount
Intelligent Management Features
Web-based management
SNMP network management
Console and Telnet management
IEEE 802.1Q VLAN Tag, up to 4094 VLAN groups
IEEE 802.1ad Port Trunking and IEEE 802.3 ad LACP
supported
IEEE 802.1d Spanning Tree
MIB II ( RFC1213 ) supported
IP Multi-cast, IGMP Snooping
Quality of Service (QoS)
Port Mirroring
Broadcast Filtering
Static MAC Address support
Port Security
GVRP