Milan Technology MIL-SM801G Switch User Manual


 
60
5-4-4. Port Controls
The menu allows changing of port configurations.
State: User can disable or enable this port. If disabled, there is no network
communication through this port.
Auto Negotiation: User can set port duplex and port speed to use auto
negotiation.
Speed setting: User can set 100Mbps or 10Mbps speed (Port1~Port8)
Duplex setting: User can set port to use full-duplex or half-duplex.
Flow control setting: User can set flow control function to be enabled or
disabled.
5-4-5. Trunking
Trunking provides a standardized means for exchanging information
between Partner Systems on a link to allow their Link Aggregation Control
instances to reach agreement on the identity of the Link Aggregation Group
to which the link belongs, move the link to that Link Aggregation
Group, and enable its transmission and reception functions in an orderly
manner. Link aggregation allows grouping of up to eight consecutive ports
into a single dedicated connection. This feature can expand bandwidth to a
device on the network. LACP operation requires full-duplex mode. For
more detailed information refer to IEEE 802.3ad.
If there are two trunk groups A and B, and B group is enabled LACP, then it
will act as a redundant link (Backup group for Trunk group A). If trunk group
A fails, Group B will be it's backup.