Filter
Top Products
SMART 216 / 232 IP
21
16. Administration > Serial Settings
Where you have a Serial device connected to the system you must configure the
RS232 settings.
To do so:
From the menu click Serial Settings, the Serial Settings appear, see Figure 19.
Figure 19 Serial Settings
Where you have a Minicom Serial Remote Power Switch, it must be connected to
Serial port 1.
For each Serial device connected, type a device name and choose the correct device
parameters.
17. Administration > User Targets
By default access is allowed to all servers for administrators. For other users,
define the access rights of each user separately.
To do so:
1. From the menu click User Targets. The User Targets Configuration window
appears, see Figure 20.